2025 Toro Groundsmaster® 3500 Series 3500-D (30807)
- Year 2025
 - Make Toro
 - Model Groundsmaster® 3500 Series
 
2025 Toro Groundsmaster® 3500 Series 3500-D (30807)
The Groundsmaster® 3500 Series is a revolutionary triplex rotary mower designed for superior performance trimming. The free-floating Contour™ Plus cutting decks allow mowing of undulating terrain without scalping. The powerful engine and exclusive traction drive system, gets the mowing job done quickly.
Features may include:
Time Saving- Unlike any other mower on the market, the Groundsmaster® 3500-D allows you to be more productive. The 68" (173 cm) width-of-cut allows you to mow generous swaths, yet its compact size and the Sidewinder® system also allow you to make tight maneuvers in trim areas. Locations normally requiring two different machines can be handled by one.
 
- The unique Toro Series/Parallel™ traction drive system provides steady traction in all conditions, even in wet grass and over undulating terrain. Its full-time, 3-wheel drive system maintains power to two of the three wheels at all times, minimizing tire spinouts and scuffing.
 
- Sidewinder cutting units shift left and right a total of 24 inches (61 cm). This allows the tire tracks to be shifted within the mowing path to reduce wear on the turf.
 
- The Contour™ Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut, while an acceleration baffle speeds clipping circulation and assures maximum power. A unique directional vane and modified discharge opening deliver even clipping dispersion.
 
- The ground-following design of each Contour™ Plus free-floating deck permits mowing the most challenging berms without scalping. Two front rollers and a rear roller allow the deck to smoothly pass over turf.
 
Engine
							Engine Manufacturer
							Kubota®
						
						
							Cylinder Liners
							3-cylinder
						
						
							Engine Power
							24.8 hp (18.5 kW) gross, at rated speed of 3000 rpm 
						
						
							Engine Torque, Maximum
							71.5 (52.7) Nm (lbs-ft) @ 2200 rpm
						
						
							Displacement
							1123cc
						
						
							Emissions
							EPA Tier IV Final and Stage V compliant.
						
						
							Cooling
							Liquid Cooled
						
						
							Starter
							Key Start
						
						
							Air Filter
							Remote-mounted 5" Donaldson® air cleaner
						
						Drivetrain
							Steering
							Rear axle with hydraulic steering. Adjustable tilt steering wheel with 22/3 turns lock to lock.
						
						
							Drive System
							3WD
						
						Fuel System
							Fuel Type
							Diesel / Biodiesel
						
						Battery
							Battery
							12V
						
						Electric
							Electrical
							12-volt 585 CCA battery and 40 amp alternator
						
						Wheels & Tires
							Tires, Front Specification
							20" x 12" - 10", 4-ply, Turf Tread
						
						
							Tires, Rear Specification
							20" x 10" - 10", 4-ply, Turf Tread
						
						Operational
							Operating Conditions
							Mowing Rate (Productivity): Up to 4.1 acres/hr (1.7 hectacres/hr)
						
						
							Operating Speed
							Ground Forward / Reverse: 0 - 9 mph (0 - 14 km/h)  / 0 - 4 mph (0 - 6.4 km/h) | Mowing: 0 - 6 mph (0 - 10 km/h)
						
						Chassis
							Frame Type
							Formed steel, welded steel and steel tubing
						
						Dimensions
							Dimensions
							Ground Following: 6" (15.3 cm) anti-scalp cups on each blade
						
						
							Ground Clearance
							6" (15.3 cm)
						
						
							Height
							76" (193 cm) with ROPS | of Cut: 0.75" - 4" (1.9 cm - 10.2 cm) in 0.25" (0.6 cm) 
						
						
							Length
							116" (295 cm)
						
						
							Overall Width
							71.8” (182 cm)
						
						
							Transport Width
							72.5" (184 cm)
						
						
							Wheelbase
							59.5" (151 cm)
						
						
							Cutting Width
							68" (173 cm)
						
						Capacities
							Fuel Capacity
							11 U.S. gal. (41.6 L)
						
						
							Hydraulic Capacity
							3.5 U.S. gal. (13.2 L)
						
						
							Oil capacity
							6.5 U.S. qt. (6.2 L)
						
						Weights
							Weight
							2,110 lbs. (957 kg) with cutting units
						
						Features
							Features
							Blade Style/Type: Rotary | Number of Blades: 3 | Hydraulic Fluid Type: Toro PX™ Extended Life Hydraulic Fluid | Interlocks: Traction pedal, operator presence in seat, PTO engage or disengage, and cutting deck mow or transport safety interlock switches. Parking break set prohibits movement through traction pedal. | Cutting Unit Type/Configuration: Two heat-treated blade segments per spindle, bolted to integral fan disc. Single pilot blade for the overlap between the two main blade assemblies.
						
						
							Construction Material, Deck
							10-gauge steel constructed chambers with 12-gauge welded reinforcements. 1.5" (3.8 cm) square x 0.25" (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16" (0.48 cm) high-strength steel and 10-gauge exterior channels.
						
						
							Cooling System
							Description: Rear-mounted, cross flow 4-row radiator
						
						
							Seat Type
							Two-piece premium commercial two-tone grey vinyl with two armrests, fore/aft adjustmen